For Car Rearview Mirror 3D Stereo Reflective Eyes Stickers Auto Strong Reflective Devil’s Eyes Waterproof Car Stickers

One Small car sticker installation method (dry sticker method):
1. Clean the car body and keep it dry.
2. Determine the location to be pasted. In general, slowly apply while scraping flat with a tool and removing the backing paper.
3. If the graphics are too small, you can also remove all the transparent transfer film and stickers before sticking them on. But care must be taken not to cause accidental adhesion.
4. After pasting, scrape and press repeatedly several times. Remove the transparent transfer film.
5. Use a craft knife to draw a knife on the car door and seam, and wrap it inward with adhesive tape.
6. Do not allow any separation or protrusion between the car sticker and the body.

1. Clean the car body and evenly sprinkle water on the parts of the car body to be pasted – to reduce the viscosity of the sticker and facilitate adjustment of its position.
2. Determine the location to be pasted. Slowly apply, gently scrape with tools, and peel off the backing paper.
3. When encountering door handles or anti scratch strips, the material should be cut open and wrapped according to the situation.
4. Adjust appropriately, confirm the general position of the graphic without error, and repeatedly scrape off water and bubbles with force. Remove the transparent transfer film.
5. Use a craft knife to draw a knife on the car door and seam, and wrap it inward to fit.
6. Do not allow any separation or protrusion between the car sticker and the body.
7. Try to let the moisture in the car sticker dry completely, and if possible, heat it moderately for drying. According to the weather conditions, wash the car again in one or two days.

How to clear:
Gently scrape the edge of the sticker with your nails, then tear it off completely without leaving any marks or damaging the car paint. If it’s cold in winter and you can’t scrape the edges, you can use a hair dryer to heat the adhesive paper appropriately. After the adhesive melts and becomes soft, it can be easily removed.